Spec Sheet

MONOGRAM 30" BUILT-IN SINGLE OVEN ZET9050SHSS
Product Specification Revised 1/18
2" (5.1) min
2 1/2"
(6.4) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4)
27 1/4"
(69.2)
ZET9050SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC.
Wall oven
Cooktop
GAS
ELEC.
Wall oven
2" (5.1) min
2 1/2"
(6.4) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4)
27 1/4"
(69.2)
ZET9050SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC.
Wall oven
Cooktop
GAS
ELEC.
Wall oven
NOTES
INSTALLATION WITH
ADVANTIUM AND WARMING
DRAWER
SIDE BY SIDE INSTALLATION
A
Dimensions per Advantium
or Microwave Oven
requirements
B
Dimension per Warming
Drawer requirements
C
Note this oven is only
approved to be installed
under specific models as
labeled on this unit.
D
Support platform made
of 3/4" (1.9 cm) wood is
required. Must be capable
of supporting 220 lbs
(99 kg). Support Platform
base to be same height as
toe kick.
E
Junction box location
for wall oven. (May also
be located in adjacent
cabinet).
F
Gas regulator and electric
connections for cooktops
must be located in an
adjacent accessible location
to the right
G
Top and/or side fillers
may be necessary if unit
is positioned between
existing cabinets. Be sure
they are attached securely,
since they will anchor the
oven in the cabinet.
H
For flush oven installations,
the cooktop cutout must
be set back 2 1/2" (6.4 cm)
plus the cleat setback.
I
Dimension varies
based on model.
example:
ZGU385 5 1/2"
(14.0 cm)
(from wall)
ZGU384 4 5/16"
(11.0 cm)
(from wall)
J
Dimension varies
based on model.
example:
ZGU385 0"(centerline)
ZGU384 12 1/16"
(30.6 cm)
(centerline)
Dimension varies based on
model ZGU385: 5 1/2" (13.9)
requires use of a 90°
1/2" FPT x 1/2" FL brass
street elbow ZGU384:
5" (12.7)
From the top surface of
the countertop to the top
surface of the wall oven
support platform
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
UNDER COOKTOP INSTALLATION
C
D
I
J
E
F
G
H
L
K
K
L
23 1/2" (59.7) min
cutout depth
27 1/4"
(69.2)
32 1/2" (82.6)
Recommended and
16 1/4" (41.3) min
Cutout location
from floor
2"
(5.1) min
2"
(5.1) min
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ZET1FHSS
A
B