Quick Specs

Product Specification Revised 1/18
STANDARD INSTALLATION
ANTI-TIP BRACKET
ZICP360NHLHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
NOTES
Use two
additional hole
locations at end
of brackets
Wall
Studs
Bracket
mounted
into vertical
wall studs
C
Ensure holes
selected are
centered on
the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
35 1/2" (90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
24" (61.0)
2"
(5.1)
7/16" (1.1)
Trim overlap
4 3/4"
(12.1)
SIDE VIEWFRONT VIEW
ELEC.
6"
(15.2)
10"
(25.4)
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
ZICP360NXLH
81 1/2"
(207.0)
FRONT VIEW
WATER
5"
(12.7)
5"
(12.7)
3 1/2"
(9.0)
WATER
10" (25.4)
Use two
additional hole
locations at end
of brackets
Wall
Studs
Bracket
mounted
into vertical
wall studs
C
Ensure holes
selected are
centered on
the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
35 1/2" (90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
24" (61.0)
2"
(5.1)
7/16" (1.1)
Trim overlap
4 3/4"
(12.1)
SIDE VIEWFRONT VIEW
ELEC.
6"
(15.2)
10"
(25.4)
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
ZICP360NXLH
81 1/2"
(207.0)
FRONT VIEW
WATER
5"
(12.7)
5"
(12.7)
3 1/2"
(9.0)
WATER
10" (25.4)
Use two
additional hole
locations at end
of brackets
Wall
Studs
Bracket
mounted
into vertical
wall studs
C
Ensure holes
selected are
centered on
the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
35 1/2" (90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
24" (61.0)
2"
(5.1)
7/16" (1.1)
Trim overlap
4 3/4"
(12.1)
SIDE VIEWFRONT VIEW
ELEC.
6"
(15.2)
10"
(25.4)
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
ZICP360NXLH
81 1/2"
(207.0)
FRONT VIEW
WATER
5"
(12.7)
5"
(12.7)
3 1/2"
(9.0)
WATER
10" (25.4)
A
B
A
Mounting the junction box
in this location will also
allow for front accessibility
through access panel.
B
Water supply area.
WARNING:
The refrigerator is top heavy
and must be secured to
prevent the possibility of
tipping forward. Failure to
do so may result in death or
serious injury.
The information below is for
cabinet design only. When
installing the anti-tip system
you must use the product
installation instructions.
The information below
applies to all installation
constructions:
• A wall bracket, bolts and
toggles will be supplied with
the unit.
• The bolts will be used to
attach bracket to wall in
4 locations. Two of the
locations must penetrate the
center of the wall studs.
• The toggles are used for
stability in drywall and when
metal studs are encountered.
Lag bolts are used in wood
studs.
• In installation opening,
measure 81-1/2" from
floor and draw a horizontal
line.
• Locate and mark the wall
studs on horizontal line.
Verify at least two studs
have their centerlines
within the center 32-1/2"
of installation opening to
ensure 2 wall studs are
penetrated.
• The bracket will be centered
left to right in opening with
bottom of bracket on the
horizontal line.
• When unit is placed in
opening, the bracket tabs
will align with openings in
back of the unit. The unit will
be secured to the bracket
using supplied “L” bolts.
See Installation Instructions
for detailed instructions.