Installation Instructions

• Remove top plug/bushing from the door using a flat

head screwdriver. Discard the bushing.

• Rotate the door 180°.

• Remove the screw from the plug/bushing on the

bottom of the door. Discard the plug/bushing but keep

the screw.

• Remove the black screw post from the bottom of the

door using a flat head scewdriver. Keep the screw

post.

NOTE: The top will now be the bottom of the door and

the bottom is now the top.

• Insert the new top plug/bushing in the new top of the

door.

• Rotate the door 180°.

STEP 2 REVERSING THE DOOR

(ZIFS240 model only) (Cont.)

STEP 2 REVERSING THE DOOR

(ZIFS240 model only) (Cont.)

• Re-insert the black screw post in the new bottom of the

door.

• Insert the new bottom plug/bushing in the new bottom

of the door. Secure with the screw removed from the

old plug/bushin.

• To install the door, set the door onto the left bottom

hinge pin. Holding the door in place, insert the new top

left hinge pin into the door and secure the hinge to the

case with screws.