Use and Care Guide

49-80818 11
Turning on
Bluetooth
®
Selecting
Wi-Fi
Press and hold the Lock Control and Timer
Start/Off pads at the same time until a beep
is heard.
Release both pads after the beep to enter the
pairing mode for Bluetooth
®
.
The current state of the Bluetooth
®
is
displayed, tap on the + pad to toggle the state.
If no selection is made on this screen within
5 seconds, this screen times out and exits the
pairing mode. Repeat pairing mode sequence
to return to this screen.
Upon entry into pairing mode, the display shows
the current state of the Bluetooth
®
signal.
Tap the – pad to see the current state of the
Wi-Fi signal. Tap the + pad to toggle the state
of the Wi-Fi signal.
If no selection is made on this screen within
5 seconds, this screen times out and exits the
pairing mode. Repeat pairing mode sequence
to return to this screen.
Cooktop Controls
Stainless Steel Gas Cooktops