Owner`s manual

installation Preparation
PARTS SUPPLIED:
[] Two #8 Phillips head wood screws, 5/8" long to
secure dishwasher to underside of countertop
(in literature package).
2 Wood Screws
MATERIALS YOU WILL NEED:
[] Ferrule, compression nut and 90° Elbow (3/8" NPT
external thread on one end, opposite end sized to
fit water supplg)
[] Thread seal tape
[] UL Listed wire nuts (3)
Materials For New Installations Only:
[] Air gap for drain hose, if required
[] Waste tee for house plumbing, if applicable
[] Electrical cable or power cord, if applicable
[] Screw type hose clamps
[] Strain relief for electrical connection
[] Hand shut-off valve
[] Water line 3/8" min. copper
[] Coupler for extending drain line, if applicable
90° Elbow, Hand Thread Wire Nuts {3)
Ferrule and Shut-Off Seal Tape
Compression Nut Valve
Waste Tee
Air
Gap
Electrical Cable
{or Power Cord, if applicable)
Hot Water Line
Screw Tgpe Strain Relief Coupler
Hose Clamps
TOOLS YOU WILL NEED:
[] Phillips head screwdriver
[] 5/!6" and !/4" nutdriver
[] T25 torque driver (PDW Ilonlg)
[] 6" Adjustable wrench
[] Level
[] Carpenters square
[] Measuring tape
[] Safetg glasses
[] Flashlight
[] Bucket to catch water when flushing the line
[] Gloves
For New Installations Only:
[] Tubing cutter
[] Drill and appropriate bits
[] Hole saw set
Phillips
Head
Screwdriver
f
T25 Torque
Driver
Flashlight
Gloves
5/16" Nutdriver
Level
6" Adjustable Tubing Cutter Carpenters
Wrench Square
Safetg Glasses Measuring Tape
Bucket Hole Saw Set Drill and Bits