Owner`s manual

Installation Instructions
Lay the dishwasher on its back. Removethe four screws
securing the toekick to the dishwasher, and remove the
toekick.
Remove the single screw just above and to the side of each
front leveling leg.
Remove the side panels and set the dishwasher upright.
To adjust the door springs:
Pullthe spring adjustment pin out of the holes, insert in the
next highest or lowest hole and test again.
Increase
Decrease
Figure K
Adjust both door springs to the same tension.
Continue moving the spring pin until door is balanced.
Replace the dishwasher side panels and proceed to Step 2.
Figure J