Specifications

– 13 –
Dishwasher Components
Throughout this manual, features and appearance
may vary from your model.
Door Panel
The door panel covers the door to the dishwasher
and protects the detergent/rinse module electronics.
For custom door panel installations, see Custom
Panel Installation.
Removal
Disconnect power.1.
Open the dishwasher door. 2.
Remove the lower 6 Phillips-head screws from 3.
the door panel.
Back out the 6 Phillips-head screws that hold the 4.
control panel cover to the door assembly 1/2
inch. Remove the door panel.
Control Panel
The control panel is located on the door assembly
behind the door panel. The control panel consists of
a 2-board push-button keypad with LED indicators
and a power board assembly.
Removal and Installation
1. Remove the door panel. (See Door Panel.)
2. Remove the 6 Phillips-head screws from the top
of the door assembly.
3. Remove the 2 Phillips-head screws from the
door switch and latch assembly.
4. Remove the control panel from the dishwasher
door.
Power Board
1. Remove the 2 Phillips-head screws from the
power board cover.
2. Mark and disconnect the terminals.
3. Remove the 2 Phillips-head screws from the
power board.
(Continued next page)