Specifications

– 14 –
Door Latch Assembly
The door latch assembly is located on the door
assembly behind the control panel cover. The
dishwasher will not operate until the door is closed,
the latch engages the door catch (holding the door
fi rmly against the seal), and the normally open
contacts of the double-pole, single-throw door
safety switch are closed.
Removal and Installation
1. Disconnect the electrical supply from the
dishwasher.
2. Open the dishwasher door.
3. Remove the door panel. (See
Door Panel.)
4. Remove the control panel from the dishwasher
door. (See
Control Panel.)
5. Remove the 2 screws and the door latch
assembly.
6. Remove the door switch from the door latch
assembly.
7. Tag and disconnect the appropriate wire
terminals from the door switch.
User Interface Boards
1. Disconnect the 2 wire harnesses from the power
board.
2. Remove the 2 Phillips-head screws from the
power board tray.
3. Remove the 5 Phillips-head screws from the 2
user interface boards.
4. Remove the 2 boards and connecting wire
harnesses.