Specifications

– 20 –

6. Disconnect the 2 terminal lugs from the heating

element.

Heating Element

The heating element maintains water temperature

during the wash and rinse cycles and heats the air

during the static dry cycle. (The heating element has

an approximate resistance value of 29.5 to 32.5 Ω.)

To check operation, see step 9 of Service Mode. Allow

one minute before opening the dishwasher door

and note if heat is present.

Removal and Replacement

1. Disconnect power.

2. Open the dishwasher door.

3. Remove the top and bottom dishwasher racks.

4. From underneath the dishwasher tub, locate the

wires leading to the heating element.

5. Pull down the nylon covers, rubber wire

protectors, and plastic strain reliefs from the

wire terminals.

2 Wire Covers

2 Wire Protectors

2 Strain Reliefs

7. Remove the nut and ground wire.

8. Remove the lock washer and spacer bracket.

10. Lift up and remove the heating element from the

dishwasher.

9. Release the 2 heating element clamps.

Ground Wire

Spacer Bracket

Lock-wash-

Nut