Specifications

– 22 –
3. Disconnect the incoming water line from the
water fi ll valve port.
4. Remove the 2 screws and mounting bracket
from the dishwasher.
5. Remove the clamp and disconnect the tub fi ll
hose from the water valve assembly.
7. Remove the 4 screws, and water fi ll valve from
the mounting bracket. Retain the mounting
bracket and screws.
6. Disconnect the 2 wires from the water fi ll valve
assembly.
Water Valve
The water valve is solenoid operated and regulated
by the electronic control. The fl ow of water is
controlled by a rubber fl ow washer capable of
maintaining a fl ow rate of 1.8 ±14% gallons per
minute (6.81 ±14% liters per minute) with incoming
water pressure of 20 to 120 PSI. The water valve is
mounted to the left hinge support of the dishwasher.
Removal and Replacement
1. Disconnect power.
2. Remove the 4 screws, access panel, and toe-
kick panel from the dishwasher.
Toe-Kick Panel
Shown with access panel removed.
Access Panel
Mounting Bracket
Port
Shown with water line removed.
Valve Assembly
Clamp
Tub Fill Hose
Mounting Bracket