Specifications

– 26 –
Note: Do not attempt to remove the Phillips-head
screw and locknut that connect the motor mount to
the dishwasher frame.
8. Disconnect the ground wire from the wash
pump motor assembly.
Caution: The clamp is easily damaged during
removal and should not be reused. Replace the old
clamp with a new universal clamp (part number:
WH1X2036).
7. Remove the clamp from the motor to the
washer arm interconnect hose.
Interconnect Hose
Clamp
Screw
Ground
As seen from rear
of dishwasher.
9. Pull the motor mount back far enough to
clear the motor tab, work the motor from the
attaching hoses, and remove the motor pump
assembly from the dishwasher.
Pull Out
Pull Out
Motor Tab
Motor Pump
Assembly
Lock Nut
As seen from right
side of dishwasher.
Motor Mount
Motor Mount