Use & care guide

Installation
Stai_less Steel I_Herior Dishwasher
Step 10
5 cure
Dishwasher
to Countertop
or Cabinetry
To maintain position and alignment the
dishwasher nlust be secured to tile COUlltertop
or to a(!jacent cabinetry.
If co/mtertop is of stone or other hard
material, secure the dishwasher to a(!jacent
cabin ets.
• Check to be s/ire that dishwasher is a(!justed
to correct height and is centered in tile
cutout.
• Open and close dishwasher door to insure
proper operation of tile door. If there is anv
binding or rubbing, reac!just leveling legs.
Secure dishwasher to countertop:
• Drill pilot holes through tile mounting
bracket and into tile underside of tile
countertop. Install 2 screws "A" provided.
Note: Take special care to ensure
CO/lllterI//O/lIlt screws are driven flush so thev
do not damage top of do()); when door is
closed.
Secure dishwasher to adjacent cabinets:
• Remove plastic plug buttoi_ on tile inside of
the dishwasher fl'ame. One (hi each side.
• Drill pilot holes through tile holes and into
the ac!jacent cabinets, Install 2 screws "D"
provided.
• Replace plastic plug buttons.
Screw D
14