Use & care guide

Installation
Slai_le,s,s Sleel I_lerior l)i,shwa,sher
Step l l
[nstall
7bekick
Assembly
• Install toekick slides to toekick support
brackets. Use slide stamped "L" on left and
"R" on right side.
• Align fl'ont and ironer toekicks, matching
screw holes.
• Align toekick to second screw hole in
toekick slide as illustrated.
• Install color matched screws "E" through
the flxmt of the toekick and into the toekick
slides. Do not tighten screws.
• Carefldly, slide assembly back until it is
aligned with a(!jacent cabinetry toekick.
• A(!just the height of the panel by loosening
screws and sliding the fl'ont panel down,
even x_ith the floor.
• Carefully, hold the door and open flflly.
Ensure that door does not strike top of
toekick.
• A(!just toekick height if necessary.
• Tighten screws.
FrontToel<icl<Panel
InnerToel<icl<
LeftSide
Toekicl<
Slide
i:
ScrewE
Slide out_toekick
AttachmentScrews
Pulltab while
Pushingtoekickin
St@ 12
Install
Side 7?ira
• Side trim filler strips are packed with this
dishwasher. If the cabinet cutout is wider
than the dishwasher, install the filler strips
on both sides of the dishwasher to cover
gaps.
• Open the door fidlv.
• Place side trim against dishwasher tub and
install 2 screws, loosely on each side.
• At!just trim to correct width. Tighten screws.
Side
Trim
Screw B
15