Use & care guide

ZPF25 Custom Door Panel Kit
l/4" Tkick (u,slom Door Pa_el
7, 5
ZPI_2r B, Black trim
cF_ r
ZPF2, _,, White trim
Tools and Materials required
• Phillips screwdriver
• Gloves to protect against sharp edges.
To pre_ent electrical shock,
clisc(mnect electrical pox_er
supply to dishwasher before
changing panels. Do not
operate dishwasher when
door asseinblv is i'ei/love(l.
Moto: It isbestthat 2 peopleperformthis installation.
The ZPF25 trim kit provides support for 1/4"
thick custoln door panel.
Moto: Maximumcustompanelweightis
10pounds.
Pore" &viter les
&lectrocutions, il flint
cl_brancher l'alimentation
&lectriq ue du lave-vaisselle
event de changer les
pam_eaux. I1 ne thut pas
thire follctiollller le lave-
vaisselle q uand la porte est cl&pos&e.
Kit Contents
• Metal door
• 8 wood screws
• 6 "6" clips
• DoorTrim
• 2 Door Springs (8)Screws
DoorTrim
"(;" Olips
2 Door
Springs
St@ l
Cut l/4"
Thick Custo"nz
Panel to Size
• Cut door panel to the dimensions shown.
• The bottom left and right corners should
be cut at 1/4" radius. See illustration.
Rote: The trim will conceal the cut edgesof the panels.
1/4" Thick
DoorPanel
23-1/8"
25-1/2"
16