Use & care guide

ZPF75 Custom Panel Kit
/4 Thick (usi0m l)oor Panel
ZPF75B, Black
ZPF75_, _ hite
Tools and Materials mqu#ed
• Phillips screwdriver
• Glovesto protect against sharp edges
• Nut driver
_To prexent electrical shock,
discmmect electrical power
supply to dishwasher
befin'e changing panels.
Do not operate dishwasher
when door assembly is
reiilo','ed.
Note: It is best that 2 people perform this installation.
The ZPF75 provides fin" the installation of
1/2" to 3/4" thick custom door panel.
Noto: Maximumcustompanelweight is
10pounds.
Pour &viter les
_)lectrocutions, il thut
d_)brancher l'alimentation
_lectrique du lave-vaisselle
avant de changer les
pmmeaux. I1 ne thut pas
thire tinactimmer le lave-
vaisselle quand la porte est d6pos6e.
Kit Contents
• Metal door
• Support bracket
• Label
• 18 Screws
• 2 Doorsprings
Metal Door
Screw Y
Screw X (6) Not Used Screw Z
(1O)Wood Screws (2) Support Bracket
Screws
Door Springs
Support
Bracket
St@ l:
Determine
Custom
Panel
Sizes
The custoin panel should be constructed in
the same nlanner as cabinet doors. All edges
can be seen and must be finished for the best
appearance.
C0untert0p Custom
__ , Panel Size Top
-t
Cabinets Dim A_' 3/4"Thick
Door Panel _Height
F Floor _ll_-
/ Bottom of 3/4" Max. _23-1/8"
Adjacent Cabinetry
_Height is equalto A minus 5-1/8" plus 1/4"
EXAMPLE:
_Height =30-1/2" minus 5-1/8" plus 1/4" is equal to 25-5/8".
• Measm'e dimension A, fl'om underside of
countertop to bottom of ac!jacent cabinets.
- Subtract 5-1/8". Control panel height is 5".
Allow 1/8" fin" gap between bottom of
countertop and top of control panel.
-Add 1/4". The custom panel will slide tip,
behind control panel.
19