Use & care guide

Installation Preparation
Slai_le,s,_ Sleel I_lerior l)i,shwa,_her
MateriaLs You
Will Need:
(not supplied)
%° elbow (3/8" NPTexternal thread on one end and opposite
end to fit hotwater supply line)
Threadseal tape
ULlisted wire nuts (3)
Fer new iastallalioas ealy:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection
Hand shut-off valve (recommended)
Water line 3/8" O.D.min. copper or 1/2" O.D.min plastic.
Wire Nuts
Air
Gap
Electrical Cable
or PowerCord
©
Screw Type Clamps
Hot Water Line
Waste
Tee
90° Elbow
ThreadSeal
Tape
Shut-Off
Valve
Strain Relief Coupler
7boLs you
Will Need:
(Not Supplied)
Phillipshead and flat blade screwdrivers
Adjustable wrench (6")
3/8", 5/16" and 1/4" nut drivers
Level
Carpenter'ssquare
Measuring tape
Safety glasses Safety Glasses
Flashlight
Fer new ieslallalio, only:
Tubing cutter
Drill and appropriate bits
Holesaw set
Hole
Saw Set
Adjustable
Wrench
Measuring Tape
Level
Flat Blade Screwdriver
Phillips Head
Screwdriver
Flashlight
Tubing
Cutter
Drill
and Bits
,,,,,,,,,,,i
dddddddddddd
Square