Use & care guide

Installation Preparation
Slai_le,_,_ Sled I_lerior Di,_hwa,sher
drain
plumbin, g
• Follow local codes and ordinances.
• Dishwasher drain hose must not exceed 10
feet in length for proper drainage.
- Tire dishwasher is supplied with a 3/4"
I.D. drain hose, 78" long. Add tip to 42"
length to the fhctory supplied hose if
necessaiw.
• Dishwasher must be comaected to waste line
Mth an air gap (not supplied) or 30"
minimum, high drain loop (depending on
local codes and ordinances) to prevent
back flow into the dishwasher.
• An air gap must be used if waste tee or
disposer com_ection is less than 12" above
floor to prevent siphoning.
• Install waste tee or disposer and air gap
according to the manufilcturer's instruc-
tions.
• Cut a hole in cabinet wall, approximately
1-1/2" in diameter for drain hose.
• Install drain hose hook to underside of
countei'top.
An air gap MUST BE USED if the drain
hose is connected to x_aste tee or disposer
lower than 12" aboxe the floor lexel.
Failure to provide the proper drain con-
necti(m height, 12", with air gap or 30"
minim um high drain loop will result in
improper draining of the dishwasher which
IIlav catlse dalnage.
! i I
IL DOlT YAVOIR un dispositif anti-retour
si le tuwm de vidange est branch_ hun tO
d'_gout ou fi un broveur d'ordures qui est _l
Illoins de 30 cI/l (12 po) atl-(lesstls (hi sol.
Si le tuyau d'_)gout n'est pas branch,) h une
bom'Je hauteur, au moiFJs 30 cm (12 po),
avec un dispositif anti-retour, ou si la
boucle d'()gout haute n'est pas {i une
hauteur d'au moins 75 cm (30 po), le
lave-vaisselle se vidange real, ce qui petit
causer des d&gfits.
Method 1 - Air Gap with Waste Tee or Disposer
Usethis methodwhen waste tee or disposer connection is less
than 12" abovethe floor.
Waste Tee Installation
DisposerInstallation
Method2- HighDrainLoop
with WasteTee orDisposer
Usethis methodwhenhighdrainloopisat least30" abovethe
floor.
Waste TeeInstallation
-- 4-
DisposerInstallation