Product specifications

58
36" Cooktop Surface Configurations
The 36" Monogram
®
Professional Cooktops are available
with a combination of a grill or griddle and 4 burners or
simply 6 burners.
ZGU36N4DDSS
with 4 burners and griddle
(Order ZGU36L4DDSS for LP gas)
ZGU36N4RDSS
with 4 burners and grill
(Order ZGU36L4RDSS for LP gas)
ZGU36N6DSS
with 6 burners
(Order ZGU36L6DSS for LP gas)
Product Dimensions and Clearances
A 36"-wide professional vent hood with a minimum 600
CFM is recommended for installation over this cooktop.
• Install the hood 30" to 36" above the cooking surface.
8"
2-1/2"
1/2"
35"
22-3/4"
26-5/8"
8-7/16"
35-7/8"
21-1/4"
12"
1/2"
Available
Backguards
Clearances between
cooktop and side wall
or combustible material
must be at least 12" on
each side.
Required Backguards
A backguard must be ordered and installed with these
cooktops (at extra cost). Choose a 22"- or 12"- high
backguard for perimeter installations. Use the 1/2" trim
for island installation or against a non-combustible
surface such as tile or brick.
Backguards: Order one with a 36"-wide cooktop:
ZXC1B36BSS, 1/2" island trim
ZXC12B36YSS, 12" backguard
ZXC22B36ASS, 22" backguard with warming shelf
Backguard with Warming Shelf
All Monogram Professional Hoods feature infrared
warming lights. The 22"-high backguard with warming
shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
• If you choose to install this cooktop with a Restaurant
Style Professional Hood, use the 1/2" island trim. These
hoods are shipped with a stainless steel backguard and
warming shelf.
Side View with Required Backguards
Installation Options
• The cooktop stainless surface will be 1/2" higher than
adjacent countertops.
• In 24"-deep cabinets, the front of the cooktop will be
approximately 1-7/8" beyond the front of the countertop.
26-5/8"
12"
1/2"
8-7/16"
Countertop
Level
22-3/4"
23-1/4"
3" to Center
Line of Gas Inlet
2-1/2"
Cabinet Face - Projecting Control Panel
Cabinet Face - Flush Control Panel
1/2"
Low Back
21-1/4"
High
Back
Front Flush With
Cabinets - a Minimum
of 25-3/4" Cabinet
Depth Required
Flush With
Cabinet Front
Cooktop
Front Projects
Outward as Shown
From Standard
Depth Cabinets.
Cooktop
1/2" Trim
36" Min.
to
Combustibles
0" Clearance
12" Min. to Combustibles
Without Backguard or 0"
to Non-Combustible Wall
with 1/2" Trim
Low Back
High
Shelf
26-5/8"
10"
2-1/2"
21-1/4"
12"
36" Min.
to
Combustibles
Advance Planning for 36" Professional Cooktops