Product specifications

77
monogram.com
48" OUTDOOR
COOKING CENTERS
36" OUTDOOR
COOKING CENTERS
27" OUTDOOR
COOKING CENTERS
24" OUTDOOR
COOKING CENTER
DUAL-BURNER
OUTDOOR COOKTOP
Advance Planning for 36" Outdoor Cooking Centers
36" Product Dimensions
ZX36CTACSS 36" Grill Cart
This cart has a fold-down shelf on each side. Inside is a
shelf for utensils and condiment bins on the door. Behind
the other door is a slide-out tray for easy access to the
LP tank.
Cart Accessories
ZX36CVCC Vinyl Cover fits all 36" models installed
on a cart.
ZGG36N31CSS
3 grill burners,
1 rotisserie burner
(Order ZGG36L31CSS
for LP Gas)
ZGG36N21CSS
2 grill burners,
2 cooktop burners,
1 rotisserie burner
(Order ZGG36L21CSS
for LP Gas)
Grill Cart Dimensions:
36"W x 35-5/8"H x 25-1/4"D
Shelf Dimensions:
21"D x 16"W
Cutouts for Built-In Installations
Installation in a non-combustible (masonry) enclosure
The grill drops into the opening and hangs from its side
flanges. A deck is not required for support.
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
12" Min to Combustibles
3" Clearance for Lid
22-5/8"
25-3/8"
2"
9-1/2"
12-1/2"
35-7/8"
12" Min. to Combustibles
3" Clearance for Lid
34-1/2"
18-1/2"
22-3/4"
9-1/8"
4x4 Opening
for Gas Supply
Line
Opening for
Access Doors
Install Electrical
Outlet for Rotisserie
On Right side
(6.5 AMP Min.)
35-1/2"
Max.
Installation in a combustible enclosure
ZX36JYSS insulated jacket is required
The insulated jacket must be supported from the bottom
by a solid deck or ledge on each side beneath the jacket.
Construct the enclosure as shown and place the insulated
jacket into the enclosure. Place the cooking center into
the jacket.
Additional Clearances
Observe all clearances shown.
• Allow at least 12" clearance on each side to combustible
vertical surfaces and at the rear when exhaust is directed
to a window or a surface that is difficult to clean.
• Allow at least 6" clearance on each side to any non-
combustible material located above the cooking surface.
Rotisserie models also require 6" clearance for placing
and handling the motor and skewer.
Built-In Accessories
ZXADYSS Stainless Steel Double Access Doors
Optional accessory to cover the access opening under
the grill in a built-in installation.
ZX36CV3Y Vinyl Cover fits built-in 36" models with
3 grill burners.
ZX36CV2Y Vinyl Cover fits built-in 36" models with
2 grill burners and 2 cooktop burners.
12" Min. to Combustibles
3" Clearance for Lid
40-1/2"
18-1/2"
23-3/4"
10-1/8"
4x4 Opening
for Gas Supply
Line
Opening for
Access Doors
Install Electrical
Outlet for Rotisserie
On Right side
(6.5 AMP Min.)
35-1/2"
Max.
3-1/8"
GRILL
IGNITOR
SMOKER
IGNITOR
GRILL
IGNITOR
ROTESSERIE
IGNITOR
SMOKER GRILLGRILLROTISSERIE
HOLD 10 SEC. WHILE LIGHTING
IGNITOR
REAR FRONT
Slide-Out
Tank Tray