Product specifications

81
monogram.com
48" OUTDOOR
COOKING CENTERS
36" OUTDOOR
COOKING CENTERS
27" OUTDOOR
COOKING CENTERS
24" OUTDOOR
COOKING CENTER
DUAL-BURNER
OUTDOOR COOKTOP
Advance Planning for 24" Outdoor Cooking Center
This 24" grill is factory set for liquid propane gas
operation. It can be converted to natural gas operation
with the ZX24NGB kit.
24" Product Dimensions
ZX24CTBSS 24" Grill Cart
This cart has one fixed shelf. Access to the LP tank is
from the back of the cart.
Cart Accessories
ZX24CVCB Vinyl Cover fits 24" grill installed on a cart.
ZGG24L20BSS
2 burners and
rotisserie
Allow 4" clearance
for lid at the rear and 12"
clearance to combustibles
at the rear and both sides
Grill Cart Dimensions:
23"W x 27"H x 16-1/2"D
Cutouts for Built-In Installations
Installation in a non-combustible (masonry) enclosure
The grill drops into the opening. The grill must be
supported by a deck or ledge on each side.
Accessory doors
ZXADYSS cutout:
24-1/8"W x 18-1/4"H
Accessory doors ZXADYSS cutout:
24-1/8"W x 18-1/4"H
18-7/8"
4-7/8"
23-3/4"
24"
9"
9"
24-3/4"
4" Min. for Lid
19"
Gas Inlet
35-1/2
Max."
24-1/2"
8"
Opening for
Access Doors
Install Electrical
Outlet for Rotisserie
on Right Side
(6.5 AMP Min.)
Installation in a combustible enclosure
ZX24JBSS insulated jacket is required
The insulated jacket must be supported from the bottom
by a solid deck or ledge on each side beneath the jacket.
Construct the enclosure as shown and place the insulated
jacket into the enclosure. Place the cooking center into
the jacket.
Additional Clearances
Observe all clearances shown.
• Allow at least 12" clearance on each side to combustible
vertical surfaces and at the rear when exhaust is directed
to a window or a surface that is difficult to clean.
• Allow at least 6" clearance on each side to any non-
combustible material located above the cooking surface
for counter space. Rotisserie models also require 6"
clearance for placing and handling the motor and skewer.
Built-In Accessories
ZX24TKBSS Trim for Built-In Installations
This kit is designed for
both combustible and
non-combustible
enclosures. The trim
conceals the gap at the
rear and sides. (This kit will
not support the weight of the grill.)
ZXADYSS Stainless Steel Double Access Doors
Optional accessory to cover the access opening under
the grill in a built-in installation.
ZX24CV2B Vinyl Cover fits built-in 24" grill.
12" Min. to
Combustibles
4" Min. for Lid
19-1/2"
Gas Inlet
35-1/2
Max."
25-3/4"
8"
Opening for
Access Doors
Install Electrical
Outlet for Rotisserie
on Right Side
(6.5 AMP Min.)