Product specifications

82
Dual-Burner
Outdoor Cooktop
ZX2NYSS (natural gas)
ZX2LYSS (liquid propane)
Overall Dimensions
(WxHxD in inches):
13 x 10-1/2 x 25-3/4
Approx. Shipping Wt. (lbs.) 56
■ Built-In or Portable
■ Natural or LP Gas Must Be
Specified by Model Number
■ Trim Kit Required for Enclosure
■ Insulated Jacket Required
for Combustible Enclosure
General Features
Porcelain-coated cast-iron burners. The spark-ignition
burners are 15,000 BTU-rated, and come with a removable
stainless steel cover that doubles as a work surface. Burners
are baffled to reflect heat into the cooking area.
Precision brass valves. Controls are mounted on durable,
brass valves that resist rust and corrosion, ensuring long
life in an outdoor environment.
Drip pan.The full-width stainless steel pan slides out easily
for removal and cleaning.
Versatile installation. The dual-burner cooktops are
designed to be built in or added to the 27" cart.
For additional details on product installation, warranty
coverage, care and maintenance, visit
Monogram.com.
Dual-Burner Outdoor Cooktop
Advance Planning for Dual-Burner Outdoor Cooktop
Dual-Burner Outdoor Cooktops are factory set for natural
or liquid propane gas. The correct model should be
ordered for the installation situation.
• The burner can be installed into an enclosure or onto the
27" grill cart. Support brackets for grill cart installation
are provided with each burner.
Product Dimensions
Clearances
When installed on the side of a 27" cart, allow at least 6"
clearance at the rear and right side to vertical combustible
materials.
• When installed in an enclosure, allow 6" clearance at the
rear and both sides to vertical combustible materials.
• When installed into a combustible enclosure, the cooking
surface should be 1" above adjacent horizontal surfaces
and 35-1/2" above the floor.
ZX2NYSS
Natural Gas
ZX2LYSS
LP Gas
23-3/4"
25-3/4"
2"
13"
10-1/2"
Installation in a non-combustible
(masonry) enclosure
The burner drops into the
opening. The burner must
be supported by a solid deck.
Installation in a combustible enclosure
ZX2JYSS insulated jacket is required
The insulated jacket must be
supported from the bottom by
a solid deck or ledge on each
side beneath the jacket.
Construct the enclosure as
shown and place the insulated
jacket into the enclosure.
Accessories
ZX2TKYSS Trim Kit
For combustible and non-combustible enclosures. The
trim will conceal the gap at the rear and sides of the
opening. The cooktop should be installed at least 35-1/2"
above the floor.
ZX27QDC Quick Disconnect Tee for use when installing a
LP Dual-Burner Cooktop (ZX2LYSS) with a 27" LP Outdoor
Cooking Center on a cart.
24-5/8"
11"
2x2
Opening
for Gas
Supply
Line
1-1/8"
1"
15-3/8"
23-5/8"
10-3/8"
13-1/8"
2x2
Opening
for Gas
Supply
Line
IGNITOR
REAR FRONT