Owner`s manual

Design Information
MODELS AVAILABLE
ZDI15, ZDIS15
Available in black, white and stainless steel.
The ice machine may be installed below a countertop
or used free-standing.
CUTOUT & PRODUCT DIMENSIONS
34" min.
Adjustable
to 34-1/2"
Cutout dimensions shown allow for a full door swing.
When installing a 3/4"thick custom door panel,
additional clearances atthe sides may be required.
Frameless Cabinets:
• If installing between frameless cabinets, a 1/2" filler
strip or side panel may be required on the hinge side.
The filler strip will act as a spacer between the door
case and adjacent cabinet, and will prevent
interference with icemaker door swing. The width of
the opening must include filler or side panel thickness.
NOTE: The addition of a 3/4" thick front panel will result
in a front to back depth of 24-1/16."
23-5/16" to
14-13/16'
OPTIONAL ACCESSORIES
ZIP75WW White and ZIP75BB Black--For the
installation of a trimless 3/4" thick custom panel on
white and black models (not for stainless steel models).
A custom handle of your choice may be installed
onto the 3/4" panel. See installation instructions on
pages 9 and 10.
ZPK1--Drain Pump Kit. For use when a floor drain is
not available.
TOOLS AND MATERIALS REQUIRED
• 1/4" socket
• 3/4" adjustable wrench
•Level
• GE SmartConnect TM Refrigerator Tubing Kit or 1/4" O.D.
copper tubing, of sufficient length to reach the installation
3