Specification Sheet
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
PAGE 2 OF 4 Product Specication Revised 6/20
1 1/4"
(3.2)
5 1/16"
(12.9)
3/4"
(1.9)
ZEU30RSJSS
29 7/8" (75.9)
28 1/2" (72.4)
Cutout width
21 3/8"
(54.3)
3 1/16"
(7.8)
3/16"
(0.5)
5 13/16"
(14.8)
2 3/8"
(6.0)
13/16"
(2.1)
15 3/4" (40.0)
19 7/16" (49.4)
28 1/4" (71.)
TOP VIEW (SHOWING CUTOUT OVERLAP)
FRONT VIEW
SIDE VIEW
19 5/8"
(49.9)
Cutout
depth
11/16"
(1.8)
Cutout
overlap
11/16"
(1.8)
Cutout
overlap
Front of Cooktop
SPECIFICATIONS
Overall Width 29 7/8” (75.9 cm)
Overall Depth 21 3/8” (54.3 cm)
Overall Height 6" (15.2 cm)
Cut-out Width 28 1/2” (72.4 cm)
Cut-out Depth 19 5/8” (49.9 cm)
Conduit Length 48" (122 cm)
Electrical Rating
9,400W at 240V/60Hz
7,100W at 208V/60Hz
Recommended Circuit
Breaker Size
40 Amps
Net Weight 38 lbs. (17.3 kg)
Approx. Shipping Weight 48 lbs. (21.8 kg)
For more details refer to the installation instructions for this product.
ATTENTION ELECTRICIAN:
This cooktop is provided with a 48" exible conduit and must
be hard wired (direct wired) into an approved junction box
and be properly grounded. It is not permitted to use a “plug
and receptacle” type installation on this cooktop.
Use a two-wire, three conductor 208/240V AC, 60 Hertz
electrical system. A white (neutral) wire is not needed
for this cooktop.
The cooktop must be installed in a circuit that does not exceed
125V AC nominal to ground.