Installation Instructions

Installation
ADJUSTING THE BAKE BURNER
AT SHUTTER (Cont.)
CHECK OPERATION OF OVEN
BROIL BURNER
STEP 11
STEP 12

FINALIZE INSTALLATION






















INSTALLATION CHECKLIST



Recheck Steps:
Double check to make sure everything in this
manual has been completed. Rechecking steps
will ensure safe use of the range.
NOTE: 



The broil burner must be on and warmed up for 3
min. prior to checking operation.
 Broil
Broil
Broil Hi






 

If the flame is long and lazy, verify the proper
orifice is installed and the regulator is converted
properly for your gas supply.
 
 
 


After confirming correct burner operation,
replace all parts.