Installation Instructions
Table Of Contents
TOOLS YOU NEEDED FOR CONVERSION
2
CONVERT THE REGULATOR(S)
3
CHANGE BURNER ORIFICES
INSTALLATION TIP:
A.
B.
DOWN
FOR OFF
NAT
LP
LP
NAT
LP
NAT
NAT
LP
WARNING: This conversion must
be performed by a qualified installer or gas supplier
in accordance with the manufacturer’s instructions
and all codes and requirements of the authority having
jurisdiction. Failure to follow instructions could result
in serious injury or property damage. The qualified
agency performing this work assumes responsibility
for the conversion.
WARNING: The rangetop, as shipped from
the factory, is set for use with its intended gas. If you
wish to use your rangetop with the alternate gas, you
must first replace the orifices and convert the pressure
regulator.
WARNING: The following adjustments
must be made before turning on the burner. Failure to
do so could result in serious injury. Be sure pressure
regulator has been converted as described in Step 2.
Installation Convert Natural Gas to LP Gas Operation
Instructions Convert LP Gas to Natural Gas Operation
1
ORIFICE HOLDER