Specifications
ZGU486NDPSS
MONOGRAM 48" PROFESSIONAL GAS RANGETOP
WITH 6 BURNERS AND GRIDDLE (NATURAL GAS)
Product Specification Revised 10/18
BACKSPLASH ACCESSORIES
The rangetop requires a 12" minimum clearance to a
vertical combustible surface at the rear. A backsplash
is required for installations with less than 12" clearance.
A custom, non-combustible backsplash can be used.
BACKSPLASH WITH WARMING SHELF
All Monogram Professional Hoods feature infrared
warming lights. The 30"-36" adjustable backsplash
with warming shelf is a perfect complement when
installed with the tapered or straight-sided hoods.
• Restaurant-Style Professional Hoods are shipped
with a 22" stainless steel backsplash and
warming shelf.
ADVANCE PLANNING FOR 48"
PROFESSIONAL RANGETOPS
Professional rangetops oer a number of choices in
size and rangetop configurations.
• All professional rangetops are factory set for natural
gas. Conversion orfices for liquid propane are packed
with product.
HIGH ALTITUDE KIT, WB28K10553,
is also available. The kits must be installed by a qualified
service technician at additional cost.
ELECTRICAL REQUIREMENTS
Rangetops must be supplied with 120V, 60Hz,
and connected to an individual, properly grounded
branch circuit protected by a 15 amp circuit breaker
or time-delay fuse.
GAS SUPPLY
• Natural gas models are designed to operate at 5" water
column pressure. For proper operation, the pressure
of the natural gas supplied to the regulator must be
between 7" and 13" water column.
• If converted to liquid propane, the models are designed
to operate at 10" water column pressure. For proper
operation, the pressure of the LP source to the
regulator must be between 11" and 13" water column.
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)
SIDE VIEW WITH A BACKSPLASH