Installation Guide

3
31-1000169 Rev. 2
Safety Information
Contents
Design Guide
Cabinet Enclosure Dimensions 4
Refrigerator Dimensions 5
The Installation Space 6
Grounding the Refrigerator 6
115° Door Swing 7
90° Door Swing 8
SS Panel Accessory & Dimensions 9
Ǝ&XVWRP3DQHO'LPHQVLRQV 
Installation Instructions
Tools, Hardware, Materials 11
Step 1. Remove Packaging 12
Step 2. Install Anti-tip Bracket 13
Step 3. Connect Water Line 13
Step 4. Connect Power 13
Step 5. Slide Unit into Enclosure 14
Step 6. Remove Toekick and Vent 14
Step 7. Level Refrigerator 14
Step 8. Install Toekick and Vent 15
Step 9. Reverse Door Swing 15
Step 10. Adjust Door Swing 16
Step 11. Install Door and Drawer Panels 18
Step12. Start Icemaker 18
Monogram Badge Placement 19
WARNING
EXPLOSION HAZARD Flammable Refrigerant
This appliance contains isobutane refrigerant,
R600a, a natural gas with high environmental
compatibility. However, it is also combustible.
Adhere to the warnings below to reduce the risk of
injury or property damage.
1) When handling, installing and operating the appliance,
care should be taken to avoid damage to the
refrigerant tubing.
2) Service shall only be performed by authorized service
personnel. Use only manufacturer-authorized service
SDUWVƎ
3) Dispose of refrigerator in accordance with Federal
and Local Regulations. Flammable refrigerant and
insulation material used require special disposal
procedures. Contact your local authorities for the
environmentally safe disposal of your refrigerator.
4) Keep ventilation openings in the appliance enclosures
or in the built-in structure clear of obstruction.
5) Do not use mechanical devices or other means to
accelerate the defrosting process.
6) Do not damage refrigerant circuit.
7) Do not use electrical appliances inside the food
storage compartment of the appliance.