Installation Instructions

CUSTOMIZATION BASICS:

Framed Or Overlay Panels, Custom

Handles and Accessory Kits

These refrigerators are designed to be customized with

decorative panels. Field installed custom door and grille

panels are required.

Side Panels

Side panels must be used whenever the sides of the

refrigerator will be exposed.

OPTIONAL ACCESSORY KITS

• ZKBSN720SS: Unification kit for an integrated

appearance on 2 stainless steel models installed

side-by-side.

• ZKBFN720NII: Unification kit for an intergraded

appearance on 2 custom panel models installed side-

by-side.

• ZKLN: Visor handle kit for use on custom panel

models in a standard installation.

Kit includes two handles.

• ZKFN: Flush inset installation kit required for all flush

installations. Includes modified toe kicks, case trim,

and other required components.

Design Guide - Standard Installation

REFRIGERATOR LOCATION

• Do not install the refrigerator where the temperature

will go below 55°F (13°C). It will not run often

enough to maintain proper temperatures.

• Do not install the refrigerator where temperatures will

go above 100°F (37°C). It will not perform properly.

• Do not install the refrigerator in a location exposed to

water (rain, etc.) or direct sunlight.

• Install it on a floor strong enough to support it fully

loaded.

31-1000452 Rev. 1