Product Specifications Sheet

For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19
FLUSH INSET INSTALLATION
HELPFUL TIPS
PAGE 14 OF 17
e 1/2" overlay panel must be
secured to a .10" spacer panel and a
1/4" thick backer panel, which slides
into the trim.
ASSEMBLE THE PANELS
WITH GLUE AND SCREWS:
• Center the spacer panel on the
backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the chart for locating
the backer panel to the overlay
panel. Secure the overlay panel
to the backer panel with glue and
screws. Screws mustbe countersunk
into the backer panel
Order ZKBFN720NII unification kit
for an integrated appearance on 2
custom panel models installed side-
by-side.
NOTE: For panels constructed with
rails and stiles (5-panel), the rails must
be a minimum of 3" wide and stiles
must be a minimum of 4" wide.
FLUSH INSET 1/2" PANEL DIMENSIONS
A B C D
1/4" Backer Panel 33 7/8" 8 7/8" 46 1/16" 21 7/8"
.10" Space Panel 32 1/2" 7 5/8" 44 11/16" 20 1/2"
1/2" Overlay Panel 38" 10 11/16" 46 9/16" 22 7/16"
A B C D
Fresh Food Panel 2 1/16" 2 1/16" 5/16" 3/16"
Freezer Panel 2 1/16" 2 1/16" 5/16" 3/16"
Grille Panel 2 1/16" 2 1/16" 1 11/16" 3/16"
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
B
C
D
PANEL DIMENSIONS
C
D
A B
Grille Back
C
D
A
B
Hinge Side
Backer with
Overlay Panel
Assembly
Door Panel Back
C
D
A
B
Freezer Drawer
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
PANEL DIMENSIONS
1/2" OVERLAY PANEL ROUTING DIMENSIONS