Spec Sheet

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
Product Specication Created 10/19PAGE 3 OF 17
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 1/4" (64.1cm)
Door Clearance 36 1/2" (92.7 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper tubing or
GE SmartConnect kit
Shipping Weight 640 lb (290 kg)
25 1/4" (64.1)
23 5/8" (60.0)
10"
(25.4)
36" (91.5)
*84"
(213.4)
*3 5/8"
(9.2)
SIDE VIEWFRONT VIEW
*83 1/2"
(212.1)
36 3/4"
(93.3)
35" (88.9)
Case width
TOP VIEW
ZIC360NXRH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
**
4 9/16" (11.6) min
clearance to a wall
for 90˚ door swing
** Dimensions based on custom handle height of 2 9/16" (6.5).
3/4"
(1.9)
73 1/4"
(186.1)
** Allow
25" (63.5) min
clearance for 130˚
door swing
** ese refrigerators are equipped with a 3-position door stop. e factory-
set 130° door swing can be adjusted to 90° or 130° for standard installation
if clearances to adjacent cabinets or walls is restricted. Allow a 15"
minimum clearance to wall for pan removal. If the 90° door stop position
is used, pan access is maintained, but pan removal is restricted.
STANDARD INSTALLATION
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.