Specifications

Installation Instructions
ISTEP11REMOVE PACKAGING
• Remove corner blocks and foam drawer stops.
• Remove all packing material, tape and protective
plastic coverings.
CAUTION: Small objects area choke hazard
for children. Remove and discard any parts not used.
ATTENTION : ,espetits objets peuvent
_trangler les enfants. II fautjeter toutes les pi_ces qui
ne sont pas utilis_es.
ISTEPel
INSTALL CUSTOM 314"
DRAWER PANELSAND HANDLES
(ZIDI240 model onlg)
3/4" Overlag Panel Dimensions
ModelZIDI240 requiresfield-installed
overlag drawer panels.
• The overlag panels must be secured
to 1/4" thick backer panels that Drawer
slide into the trims. A .10" thick
spacer panel must be placed
between the overlag and backer
panels.
1/4"
• Custom handles of gour choice, Backer_ _-.10Inch
supplied bg gour cabinet maker, Panel Spacer
must be installed on these overlag panels.Countersink
all screws into the backer panels.Screwscannot
protrude from the backer panels.
IMPORTANTNOTE:Maximum total weight for custom
drawer panels are 25 pounds (12-1/2 pounds maximum
each drawer).
A
1/4" Backer 23-3/16" 14-11/16"
12-1/2 Ibs.
max.
T
0.10" Spacer 22-1/2" 14-3/16"
* 3/4" Overlay 23-5/8" 15-1/16"
12-1/2 Ibs. max. ] _
*Haintain a 1/4" min. gap between
top and bottom drawer panels.
Assemble overlag panelswith
glue and screws.
• Centerspacer panel on the
backer panel, left to right
and top to bottom. Secure
the panels with glue.
• Centerthe spacer/backer panel
on the overlag panel. Securewith glue and screws.
Countersink all screws into the backer panel.
ISTEP 2 1INSTALL CUSTOM 314"
DRAWER PANELS AND
HANDLES (CONT.)
(ZIDI240 model onlg)
Instell custom drawer panels end hendles:
• Open drawers.
• Remove 2 screws holding each trim; lift trims off.
Retain screws.
• Custom handles of gour choice, supplied bg gour
cabinet maker, must be installed onto the overlag
panels before theg are slid into the trims. Countersink
all screws into the backer panels. Screws cannot
protrude from the backer panels.
ScrewsMust
BeCountersunk
IntoPanel
Ha!dlE_e
DrawerPanel
• Slide overlag panels into the trims.