Installation Guide

31-1000190 Rev. 1

STEP 5 INSTALL DOOR TRIMS

(cont.)

Ŷ Without touching the exposed

tape to the side of the door,

align the top of the trim with

the top of the door panel. (tape

backer should be sticking out

when aligning the trim).

Ŷ Once the trim is in location

(aligned to the top of the door,

hinge covers, tight to the door

and door panel), then push

on the exposed tape area to

secure. Slowly start pulling the

tape backer off and pushing to

adhere the tape while keeping

the trim in place until you have

completely removed the tape

backing.

Ŷ Secure the top and bottom portions of the outer trim

after the inner trim has been secured.

1. Gently pull the top of the outer trim away from the

door panel in order to expose the tape backer.

Do not bend too far away from the door or trim

damage may occur.

2. Peel the backer off the outer trim tape and press

to secure the trim.

3. Repeat for the bottom of the outer trim.

Ŷ Once the handle side door trim is in place, repeat the

same steps for the hinge side door trim.

Installation Instructions - Custom Overlay Door Panel