ZIK303NPP, ZIC303NPP, ZIK303GNN, ZIW303NPP Mixed Product Triple Installation

31-1000576 Rev. 0 3
TRIPLE INSTALL WITH 30" BF IN CENTER POSITION - 24" COLUMNS
NOTE: These instructions do not replace individual product installation instructions. Refer to
product installation instructions for full installation process.
Minimum Install Width
1. Panel required between units: 3/4” thick, and 3 1/2-6” deep.
2. Position of ZIF241 & ZIR241 can be interchanged.
3. Heater kits required: ZUG30 installed on left side of ZIK30, and ZKUN installed on left side of ZIR/ZIF241 unit on
the right.
4. Configurations with units installed hinge to handle may result in interference while opening doors. To
enable all three doors to open independently, additional clearance between the hinge to handle units is
required. See next page for details.
5. When installing custom handles, ensure handle position allows full door opening of adjacent units.
Example: Minimalist handle should be mounted with centerline a minimum of 1-3/4" from edge of door panel.
Statement handle should be mounted with centerline a minimum of 2” from edge of door panel.
6. Center unit requires 90° hinge pin.
7. Each unit needs its own anti tip system installed per individual installation instructions.
8. Electrical and water locations for each product are per individual install instructions.
9. Mounting template should be adjusted by 7/8” from the handle side of the door.
24” FZR CLM
ZIF241NPNII
24” REFRIG CLM
ZIR241NPNII
30” CONVERTIBLE
ZIK30GNNII
ZIW303NPPII
ZIK303NPPII
ZIC303NPPII
23-13/16” 23-13/16”
Total opening width: 79-1/8”
24-9/16” opening:
column + 3/4” panel
24-9/16” opening:
column + 3/4” panel30” ZIK opening
3/4”
Heater Kit
ZUG30
Heater Kit
ZKUN
3/4”
Door Panel Width:
24-7/16"
Door Panel Width:
29-3/4"
Door Panel Width:
24-7/16"