Specifications
ZIF360NHLHMONOGRAM 36" BUILT-IN ALL-FREEZER
Product Specification Revised 1/18
3/4" RAISED DOOR PANEL ROUTING
Trimmed freezers are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door and grille panels are
required. For 3/4" raised panels,
routing is required. The router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required
per the diagrams shown. This will
create “picture frame’ routing
allowing the panels to slide into
the attached door and grille trims.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs
Note: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3" wide
and stiles must be a minimum of
4" wide.
Door Handles
Custom handles are required for
flush installation.
ZKHPSS1: Professional stainless
steel handle designed to fit 3/4"
custom panels. Kit includes one
handle – 30 1/2" long.
ZKHSS2: European tubular
stainless steel handle designed to
fit 3/4" panels. Kit includes one
handle – 64 1/4" long.
Order ZUG2: Unified grille kit for
dual installation. Maximum total
panel weight - 25 lbs.
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
1/4"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16"
2-1/16"
ROUTER DEPTH 1/4" ROUTER DEPTH 1/4"
1/4"
3/32"
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
NOTES
FLUSH INSET
INSTALLATION