Specifications

ZIF360NHLHMONOGRAM 36" BUILT-IN ALL-FREEZER
Product Specification Revised 1/18
Grille Panel
Door
Panel
D
A
Door
Panel
B
C
D
A B C D
74" 10 7/16" 69 3/4" 36 7/8"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS DUAL INSTALLATION
Trimmed freezers are designed to
be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required.
For 3/4" raised panels, routing is
required. The router depth is 1/4" all
the way around the panel’s backs.
Additional panel width reductions
are required per the diagrams
shown. This will create “picture
frame’ routing allowing the panels to
slide into the attached door, drawer
and grille trims.
Maximum total panel weight:
• Fresh food door panels – 67 lbs.
• Grille panel – 25 lbs.
Door Handles:
Custom handles are required for
flush installation.
ZKHPSS1: Professional tubular
stainless steel handle designed to
fit custom panels. Kit includes one
handle – 30 1/2" long. Order
2 kits from your Monogram supplier.
ZKHSS2: European tubular stainless
steel handle designed to fit 3/4"
panels. Kit includes one handle –
64 1/4" long.
Order ZUG2: Unified grille kit for one
continuous panel in dual installation.
Maximum total door panel weight -
25 lbs.
3/4" RAISED DOOR PANEL ROUTING - (SEE PAGE 4 FOR
3/4" GRILLE PANEL ROUTING DIAGRAMS)
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/16"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE
NOTES
FLUSH INSET
INSTALLATION