Manualshelf

Specifications

ManualsBrandsMonogram ManualsBuilt-In Full Refrigerators / FreezersMonogram 36" Professional Stainless Steel Built-In All Freezer
12345
OVERALL DIMENSIONS
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIFP360NHLH
Product Specification Revised 1/18
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An inidividual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 7/8" (65.7 cm)
Door Clearance 36 3/4" (93.4 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 569 lb
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimension may vary due to manufacturing tolerances.
36" (91.5)
23 7/8" (60.7)
*84"
(213.4)
2 3/4"
(7.0)
*3 1/2"
(8.9)
*83 1/2"
(212.1)
36 3/4"
(93.4)
TOP VIEW
35" (89.0)
Case width
30 1/2"
(77.5)
*32 1/4"
(82.0)
ZIFP360NXLH
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 25" (63.5) min
clearance for 130˚
door swing
** Allow
5" (12.7) min
clearance to a wall
for 90˚ door swing
25 7/8" (65.7)
*73"
(185.4)
**These units are equipped with a 2-position door stop. The factory set 130° door
swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.
Allow 15" minimum clearance to wall for pan removal. If the 90˚ door stop position is
used, pan access is maintained but pan removal is restricted.
36" (91.5)
23 7/8" (60.7)
*84"
(213.4)
2 3/4"
(7.0)
*3 1/2"
(8.9)
*83 1/2"
(212.1)
36 3/4"
(93.4)
TOP VIEW
35" (89.0)
Case width
30 1/2"
(77.5)
*32 1/4"
(82.0)
ZIFP360NXLH
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 25" (63.5) min
clearance for 130˚
door swing
** Allow
5" (12.7) min
clearance to a wall
for 90˚ door swing
25 7/8" (65.7)
*73"
(185.4)
**These units are equipped with a 2-position door stop. The factory set 130° door
swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.
Allow 15" minimum clearance to wall for pan removal. If the 90˚ door stop position is
used, pan access is maintained but pan removal is restricted.

Summary of content (5 pages)