Manual

12
Shelves
Door
shelves
Some door shelves are adjustable and can be
moved up and down to meet your storage needs.
The deeper door shelves must be placed at the
bottom of the door.
To remove: Lift the shelf up and slide it towards
you.
36” All-Refrigerator and All-Freezer Units
Adjustable
shelves
Tempered glass shelves in the refrigerator and
wire shelves in the freezer enable you to make
efficient shelf arrangements to fit your family’s
food storage needs.
To remove shelves: Tilt shelf up at front, then lift
it up and out of tracks on rear wall of refrigerator/
freezer.
Handle glass shelves carefully. Rough handling
of tempered glass can cause it to shatter.
To replace shelves: Select desired shelf height.
With shelf front raised slightly, engage top lugs in
tracks at rear of cabinet. Then lower front of shelf
until it locks into position.
CAUTION
Do not clean glass shelves or covers
with warm water when they are cold. Glass shelves and
covers may break if exposed to sudden temperature
changes or impact, such as bumping or dropping.
Tempered glass is designed to shatter into many small
pieces if it breaks.
MISE EN GARDE
Ne nettoyez pas les clayettes ou les
couvercles en verre avec de l’eau tiède quand ceux-ci sont
froids. Les clayettes et couvercles en verre peuvent se
casser s’ils sont exposés à des changements soudains de
température ou si vous les cognez ou les faites tomber. Le
verre trempé est conçu pour se briser en petits morceaux
en cas de casse.
Drawer
removal
Drawers in the refrigerator/freezer will stop before
coming all the way out, to help prevent contents
from spilling onto floor.
To remove a drawer, pull the drawer out and
lift the front of the drawer up and out of the wire
holder. Lift the back of the drawer up and out.
To replace a drawer, place the back of the
drawer in the wire holder, making sure the
extensions of the side of the drawer fit into the
back of the wire holder. Lower the front of the
drawer into the wire holder. Press firmly on the
top of the drawer.