Manual

Door
alarm
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will come
on. To turn it off, press it again.
When the DOOR ALARM is active,
the alarm will flash and beep if
you keep the door open for more
than 2 minutes.
8
Temperature Controls
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display between
Fahrenheit and Celsius, press Temp Display
°C/°F.
The temperature display shows the actual
temperature of the freezer or fresh food unit.
The actual temperature will vary from the set
temperature based on factors such as door
opening, amount of food, defrost cycling and
room temperature.
NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.
To turn off the cooling system in either the
freezer or fresh food unit, press the plus (+) pad
until the display shows OFF.
To turn the cooling system on, press the minus
(–) pad. The preset temperature of 0°F for the
freezer or 37°F for the fresh food unit will appear
in the display.
To check the current temperature setting for
the fresh food or freezer unit, press the plus
(+) or minus (–) pad once. After 5 seconds, the
display will return to the actual temperature.
To change the temperature settings, press the
plus (+) or minus (–) pad for each increment to
the desired temperature set point. Allow 24 hours
for the unit to reach the temperature you have
set.
Temperature Ranges
Low High
Fresh Food
Freezer
NOTE:
Setting the controls to OFF stops cooling,
but does not shut off electrical power to the unit.
34°F
1°C
–6°F
–21°C
42°F
5°C
+4°F
–15°C
36” All-Refrigerator and All-Freezer Units
All-Freezer Controls
All-Refrigerator Controls
Preset Settings: Allow 24 hours to reach these preset temperatures.
Preset Settings: Allow 24 hours to reach these preset temperatures.