Owner's Manual

Design Guide - Flush Inset Installation

SIDE PANELS

Side panels must be used

whenever the sides of the

refrigerator will be exposed.

The 1/4” (0.63 cm) side

panels will slip into the

side case trim. Secure the

panels to the refrigerator

with stick-on hook and loop

fastener strips. Order the

side panels from the cabinet

manufacturer.

• Cut a notch in the top front

corner as shown to allow

clearance for corner keys

in the front side trim.

* Depending on installation height.

*84"

2-9/16"

24"

*3" to 4"

3/16"

1-7/8"

SIDE CLEATS

Wood cleats are required to be installed vertically down

both sides of the cabinet opening to provide depth stop

for the refrigerator when installed into the opening.

The cleat should be installed per the diagrams below

based on the type of panel being used.

5-1/4”

Finished

Cleat

Case Trim

1/2”

3/4” Panel

DOOR

TOP VIEW

5-3/8”