Specification Sheet

For questions about your
appliance, please call 1-800-626-2000.
PAGE 11 OF 17 Product Specication Revised 10/20
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
DETAIL TOP
DETAIL BOTTOM
1/8"
1-7/16"
ROUTER DEPTH 1/4"
Trimmed refrigerators are designed to
be customized with decorative panels.
Field-installed 1/2" or 3/4" custom door
and grille panels are required. For 3/4"
raised panels, routing is required. e
router depth is 1/4" all the way around
the panel’s backs. Additional panel width
reductions are required per the diagrams
shown. is will create “picture frame”
routing allowing the panels to slide
into the attached door and grille trims.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs
Note: For panels constructed with rails
and stiles (5-panel), the rails must be a
minimum of 3" wide and stiles must be
a minimum of 4" wide.
Door Handles:
Custom handles are required for flush
installation.
Order a ZKBFN720NII unification
kit for an integrated appearance on
2 custom panel models installed
side-by-side.
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16"
2-1/16"
ROUTER DEPTH 1/4" ROUTER DEPTH 1/4"
1/4"
3/32"
FLUSH INSET
INSTALLATION
HELPFUL TIPS
Grille Panel
Door
Panel
A
B
C
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS SINGLE INSTALLATION
A B C
38" 10 7/16" 69 3/4"
3/4" GRILLE DOOR PANEL ROUTING