Manualshelf

Specifications

ManualsBrandsMonogram ManualsRefrigeratorsMonogram 36 Inch Wide 22 Cu. Ft. All Fridge Refrigerator with Pro Handle and Right Hinge Door Swing
12345
ZIRP360NHRHMONOGRAM 36" BUILT-IN ALL-REFRIGERATOR
Product Specification Revised 1/18
36" (91.5)
30 1/2"
(77.5)
*31 3/4"
(80.6)
*84"
(213.4)
*73 1/4"
(186.1)
*3 1/2"
(8.9)
25 3/4" (65.4)
23 7/8" (60.7)
2 3/4"
(7.0)
*83 1/2"
(212.1)
ZIRP360NXRH
35" (89.0)
Case width
36 3/4"
(93.4)
TOP VIEW
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 25" (63.5) min
clearance for 130˚
door swing
** Allow
5" (12.7) min
clearance to a wall
for 90˚ door swing
**These units are equipped with a 2-position door stop. The factory set 130° door swing can
be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. Allow 15" minimum
clearance to wall for pan removal. If the 90˚ door stop position is used, pan access is
maintained but pan removal is restricted.
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 3/4" (65.41 cm)
Door Clearance 36 3/4" (93.4 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 569 lb
Dimensions in parentheses are in centimeters unless otherwise noted. Actual
product dimension may vary due to manufacturing tolerances.
36" (91.5)
30 1/2"
(77.5)
*31 3/4"
(80.6)
*84"
(213.4)
*73 1/4"
(186.1)
*3 1/2"
(8.9)
25 3/4" (65.4)
23 7/8" (60.7)
2 3/4"
(7.0)
*83 1/2"
(212.1)
ZIRP360NXRH
35" (89.0)
Case width
36 3/4"
(93.4)
TOP VIEW
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 25" (63.5) min
clearance for 130˚
door swing
** Allow
5" (12.7) min
clearance to a wall
for 90˚ door swing
**These units are equipped with a 2-position door stop. The factory set 130° door swing can
be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. Allow 15" minimum
clearance to wall for pan removal. If the 90˚ door stop position is used, pan access is
maintained but pan removal is restricted.
OVERALL DIMENSIONS

Summary of content (5 pages)