Spec Sheet
For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 9 OF 14
FLUSH INSET INSTALLATION
HELPFUL TIPS
FLUSH INSET INSTALLATION 3/4" PANELS
FLUSH INSTALLATION
ZISB360DH
39" (99.1) Flush inset width
37 1/2" (95.3)
Width between cleats
12"
(30.5)
7"
(17.8)
7"
(17.8)
5"
(12.7)
3/4" (1.9)
Width of side cleats
5 1/4" (13.3)
1/2" (1.3)
26 3/16" (66.5)
Flush inset depth
20 15/16" (53.2)
Depth to cleat
E
FRONT VIEWSIDE VIEW
TOP VIEW
WATER
3 1/2"
(8.9)
W
Finished cleats
Finished
cleats
Case Trim
3/4" Panel
Case
Door
6"
(15.2)
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
85"
(215.9)
85"
(215.9)
B
ANTI-TIP BRACKET
FRONT VIEW SIDE VIEW
W
24" (61.0)
1 1/2"
(3.8)
3 1/4"
(8.3)
7/16"
(1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
47 1/2" (120.7)
20" (50.8)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
6"
(15.2)
5"
(12.7)
5"
(12.7)
5"
(12.7)
ZISB480DX
SIDE VIEW INSTALLED
UNDER SOFFIT
SOFFIT
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
AND NO SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
D
C
A
Mounting the junction box in this
location will also allow for front
accessibility through access panel.
B
Water supply area.
WARNING:
e refrigerator is top heavy and
must be secured to prevent the
possibility of tipping forward.
Failure to do so may result in death
or serious injury.
e information below is for cabinet
design only. When installing the
anti-tip system you must use the
product installation instructions.
Determine your installation
construction and required anti-tip
configuration:
C
Cut a 1" x 4" block 35" long.
Measure and mark under the soffit,
5 1/4" from the front edge of the
cabinet. Secure the wood block
under the soffit. From the bottom
of the block to the finished floor
should measure 84".
D
Wooden Wall Studs and No Soffit
• Cut a 2" x 4" block and secure to
brackets provided.
• Secure brackets to back wall of
opening at 84" or your installation
height from the floor.
See Installation Instructions for
detailed instructions.
FLUSH INSET KIT ZKFN REQUIRED
A