Specification Sheet

Product Specication Revised 2/20
For questions about your
appliance, please call 1-800-626-2000.
PAGE 12 OF 14
FLUSH INSET INSTALLATION
HELPFUL TIPS
3/4" RAISED GRILLE PANEL ROUTING
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
3/16"
DETAIL TOP
DETAIL BOTTOM
ROUTER DEPTH 1/4"
2"
2 1/16" 2 1/16"
ROUTER DEPTH 1/4"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door and grille panels are
required. For 3/4" raised door and
grille panels, routing is required.
e router depth is 1/4" all the way
around the panel’s backs. Additional
panel width reductions are required
per the diagrams shown. is will
create “picture frame” routing
allowing the panels to slide into the
attached door and grille trims.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 75 lbs.
• Freezer drawer panel – 53 lbs.
• Grille panel – 18 lbs.
DOOR HANDLES
Door handle not included. A custom
handle supplied by your cabinet
maker may be used.