Installation Guide

12
DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
1/4” (0.63 cm) FRAMED
PANEL
The dispenser trim fits over the
custom panel and snaps into the freezer
door.
The clips will not engage the door if
the panel is more than 0.250”
(0.63 cm) thick.
If the panel is less than 0.250”
(0.63 cm) thick, a noticeable gap may
be created around the dispenser trim.
3/4” (1.91 cm) OVERLAY
PANEL
The dispenser trim fits over the
custom panel and snaps into the
freezer door.
The clips will not engage the door if
the panel is more than 1.100” (2.79
cm) thick.
If the panel is less than 1.100” (2.79
cm) thick, a noticeable gap may be
created around the dispenser trim.
Design Guide - Standard Installation
1/4” Dispenser Trim
3/4” Overlay Dispenser Trim
31-49171