User Manual

Pust this button to activate Monogram
Connect. See page 18 for more information
or go to www.monogram.com/connect to
download the App.
8
Temperature Controls
Built-In Refrigerators
Temperature
controls
The temperature display shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature
will vary from the set temperature based on
factors such as door opening, amount of food,
defrost cycling and room temperature.
NOTE: Frequent door openings or door left
open for periods of time may increase the
internal temperature of the freezer and fresh
food compartments temporarily.
To turn off the cooling system in both the
freezer and fresh food compartments, press
either (+) pad until both displays show OFF.
To turn the cooling system on, press either
(-) pad. The preset temperatures of 0°F and
37°F will appear in the display.
To check the current temperature setting
for the fresh food or freezer compartment,
press the (+) or (-) pad once. After 5
seconds, the display will return to the actual
temperature.
To change the temperature settings, press
the (+) or (-) pads to desired temperature set
point for fresh food and freezer separately.
Allow 24 hours for the refrigerator to reach the
temperature you have set.
NOTE: Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.
Door
alarm
WiFi
Connect
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will
come on. To turn it off, press it again.
On models with a dispenser, the Door Alarm
feature is located on the dispenser panel on
the front of the freezer door.
When the DOOR ALARM is active, the alarm
will flash and beep if you keep the door open
for more than 2 minutes.
Preset Settings:
Allow 24 hours to reach these preset temperatures.
Dispenser Models
Non-Dispenser Models
Temperature Ranges
Low High
34°F 42°F Fresh
Food
1°C 5°C
-6°F 4°F Freezer
-21°C -15°C