Quick Specification

For questions about your
appliance, please call 1-800-626-2000.
PAGE 3 OF 4 Product Specication Revised 6/20
HELPFUL TIPS
FRONT VIEW SIDE VIEW
W
24" (61.0)
2 1/4"
(5.7)
4 7/8"
(12.4)
7/16" (1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
47 1/2" (120.7)
20" (50.8)
*84"
+
-
.500
(213.36)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5)
From floor
to bottom
of electrical
area
6 3/4"
(17.1)
6 3/4"
(17.1)
5"
(12.7)
5"
(12.7)
ZISP480DXSS
SIDE VIEW INSTALLED
UNDER SOFFIT
SOFFIT
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
AND NO SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
Top Case Trim
3/4"
Min.
Side View Top
Case Trim
Install Screws
Through Trim and Into
3/4" Min. Wood Brace
FRONT VIEW INSTALLED
WITH METAL WALL STUDS
AND NO SOFFIT
FRONT VIEW SIDE VIEW
W
24" (61.0)
2 1/4"
(5.7)
4 7/8"
(12.4)
7/16" (1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
47 1/2" (120.7)
20" (50.8)
*84"
+
-
.500
(213.36)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5)
From floor
to bottom
of electrical
area
6 3/4"
(17.1)
6 3/4"
(17.1)
5"
(12.7)
5"
(12.7)
ZISP480DXSS
SIDE VIEW INSTALLED
UNDER SOFFIT
SOFFIT
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
AND NO SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
Top Case Trim
3/4"
Min.
Side View Top
Case Trim
Install Screws
Through Trim and Into
3/4" Min. Wood Brace
FRONT VIEW INSTALLED
WITH METAL WALL STUDS
AND NO SOFFIT
A
B
D
C
The refrigerator will project forward, slightly beyond adjacent cabinetry.
A
Mounting the junction box in this
location will also allow for front
accessibility through access panel.
B
Water supply area.
WARNING:
The refrigerator is top heavy and must be
secured to prevent the possibility of tipping
forward. Failure to do so may result in death
or serious injury.
The information below is for cabinet
design only. When installing the anti-tip
system you must use the product installation
instructions.
Determine your installation construction
and required anti-tip conguration.
C
Installed Under Sot
After installing unit into installation
opening, raise grille panel and screw
metal case sides to adjacent cabinet.
When installed under a sot, the sot
cannot exceed 24" deep. The top case
trim overlaps the bottom of the sot.
D
Wooden Wall Studs and No Sot
• Cut a 2" x 4" block and secure to
brackets provided.
• Secure brackets to back wall of opening
at 84" or your installation height from
the oor.
E
Metal Wall Studs and No Sot
This method requires securely fastened
cabinets on both sides and a 3/4"
minimum wood brace above unit, with
it’s front surface 24" from back wall.
• After installing unit into opening, raise
grille panel and attach metal case top trim
to 3/4" minimum wood brace.
• The brace spanning the enclosure
must be securely fastened to cabinets
on both sides.
See Installation Instructions for detailed
instructions.
STANDARD INSTALLATION
ANTI-TIP BRACKET
E