Installation Guide

STEP 14 CHECK AND CORRECT DOOR ALIGNMENT (Cont.)
NOTICE: Follow instructions very carefully.
DETERMINE CORRECT SPACER
This kit contains 12 plastic spacers (J) (2 of each size).
Match spacer to illustration below to be sure you have
selected the correct size as determined in the charts below.
LH Fresh Food door is higher than the RH door:
Select the correct spacers to install on the Fresh Food
hinges as determined by Dimension A.
LH Door Dim. A
Install LH
Spacer
Install RH
Spacer
ƎWRƎ Ǝ Ǝ
1/16ƎWRƎ Ǝ Ǝ
ƎWRƎ Ǝ Ǝ
ƎWRƎ 1/8Ǝ Ǝ
ƎWRƎ Ǝ Ǝ
ƎWRƎ Ǝ Ǝ
RH Fresh Food door is higher than the LH door:
Select the correct spacers to install on the Fresh Food
hinges as determined by Dimension A.
RH Door Dim. A
Install LH
Spacer
Install RH
Spacer
ƎWRƎ Ǝ Ǝ
ƎWRƎ Ǝ Ǝ
3/32ƎWRƎ Ǝ Ǝ
ƎWRƎ Ǝ Ǝ
ƎWRƎ 9/32Ǝ Ǝ
ƎWRƎ Ǝ Ǝ
NOTE: If this plastic spacer package is misplaced, order
WR49X10162 for a replacement kit.
1. Open the grille panel.
2. Remove 4 screws on the hinge plate.
3. Use pliers to remove door stop pin.
4. Lift door off bottom hinge pin. The door must be held
in place while spacers are being exchanged.
5. Remove the original plastic spacer.
6. Place the selected spacer over the hinge.
7. Reverse all steps to replace the door
Ǝ
Ǝ
Ǝ
Ǝ
Ǝ
Ǝ
Dimension
A
Dimension
A
Remove
Pin
Remove 4 Screws
Lift off and replace
plastic spacer
INSTALLATION INSTRUCTIONS
17
31-1000414 Rev. 1