Installation Instructions

43
Design Guide - Flush Inset Installation for
All-Refrigerator and All-Freezer
1/2” (1.27 cm) OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed on
trimmed models. The overlay panel must be secured to a 1/4”
(.63 cm) thick backer panel which slides into the trim. A spacer panel
0.10” (0.25 cm) thick must be placed between the overlay and backer
panel.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel to the
overlay panel. Secure the overlay panel to the backer panel with
glue and screws. Screws must be countersunk into the backer
panel.
Fresh Food Door Grille
1/4” (0.63 cm)
Backer Panel
69-5/16” x 33-7/8”
(176.05 cm x 86.04 cm)
8-7/8” x 33-7/8”
(22.54 cm x 86.04 cm)
.10” (0.25 cm)
Spacer Panel
67-15/16” x 32-1/2”
(172.56 cm x 82.55 cm)
7-5/8” x 32-1/2”
(16.37 cm x 82.55 cm)
1/2” (1.27 cm)
Overlay Panel
69-3/4” x 38”
(177.16 cm x 96.52 cm)
10-7/16” x 38”
(26.51 cm x 96.52 cm)
IMPORTANT NOTE: Maximum total weight for the
assembled panels:
• Fresh food door panel – 75 lbs. (34.02 cm)
• Grille Panel – 18 lbs. (8.16 cm)
.250” + .10” + .50” = .850” Total Panel Thickness
(0.635 cm + 0.254 cm + 1.27 cm = 2.159)
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
C
D
A B
Grille Back
ABCD
Door Panel 2-1/16”
(5.24 cm)
2-1/16”
(5.24 cm)
3/16”
(0.47 cm)
1/4”
(0.63 cm)
Grille Panel 2-1/16”
(5.24 cm)
2-1/16”
(5.24 cm)
1-7/16”
(3.65 cm)
1/8”
(0.31 cm)
Panel Dimensions
Hinge Side
Fresh Food Back
Backer with
Overlay Panel
Assembly
A
B
C
D
Door Back
31-1000454 Rev. 0