Installation Instructions

8
Design Guide - Flush Inset Installation for French Door
Bottom Freezer Refrigerator
1/2” (1.27 cm) OVERLAY PANEL
DIMENSIONS
For a more custom appearance, overlay panels may be
installed on trimmed models. The overlay panel must
be secured to a 1/4” (.64 cm) thick backer panel which
slides into the trim. A spacer panel 0.10” (0.25 cm) thick
must be placed between the overlay and backer panel.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer panel, left to
right and top to bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel
to the overlay panel. Secure the overlay panel to the
backer panel with glue and screws. Screws must be
countersunk into the backer panel.
Fresh Food Freezer Grille
1/4” (0.63 cm)
Backer Panel
46-1/16” x 16-1/2”
(116.99 cm x 41.91 cm)
21-7/8” x 33-7/8”
(55.56 cm x 86.04 cm)
8-7/8” x 33-7/8”
(22.54 cm x 86.04 cm)
.10” (0.25 cm)
Spacer Panel
44-11/16” x 15”
(113.51 cm x 38.10 cm)
20-1/2” x 32-1/2”
(52.07 cm x 82.55 cm)
7-5/8” x 32-1/2”
(19.37 cm x 82.55 cm)
1/2” (1.27 cm)
Overlay Panel
46-7/16” x 18-3/4”
(120.49 cm x 47.63 cm)
22-3/8” x 38"
(56.83 cm x 96.52 cm)
10-13/16” x 38”
(27.46 cm x 96.52 cm)
.250” + .10” + .50” = .850” Total Panel Thickness
(0.635 cm + 0.254 cm + 1.27 cm = 2.159)
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
ABCD
Door Panels 2-1/16”
(5.24 cm)
3/16”
(0.47 cm)
3/16”
(0.47 cm)
3/16”
(0.47 cm)
Drawer Panel 2-1/16”
(5.24 cm)
2-1/16”
(5.24 cm)
1/4”
(0.64 cm)
1/4”
(0.63 cm)
Grille Panel 2-1/16”
(5.24 cm)
2-1/16”
(5.24 cm)
1-11/16”
(4.28 cm)
1/4”
(0.63 cm)
Panel Dimensions
Hinge
Side
Hinge
Side
Handle
Side
Fresh
Food
Back
Backer with
Overlay Panel
Assembly
A
B
C
D
Fresh
Food
Back
A
B
C
D
C
D
A B
Grille Back
C
D
A B
Freezer Back
Panel Locations
IMPORTANT NOTE: Maximum total weight for the
assembled panels:
• Fresh food door panels – 30 lbs. (14 kg)
• Freezer drawer panel – 28 lbs.(13 kg)
• Grille Panel – 11 lbs. (5 kg)
31-1000454 Rev. 0