Spec Sheet

ZV36RSFSSMONOGRAM 36" STAINLESS STEEL PROFESSIONAL HOOD
Listed by
Underwriters
Laboratories
Product Specification Revised 1/18
Model ZV36R
12"
22-1/2"
35-15/16"
35-15/16"
25"
Each hood is shipped with a stainless steel backguard and
a warming shelf. Hoods may be installed with the shelf or
backguard alone, or with both as shown.
INSTALLATION CLEARANCES
These vent hoods are designed to be installed onto a
wall or beneath a sot or cabinet.
INSTALLATION WITH WARMING SHELF
• Hoods must be installed 32" Min., 38" Max. over any
type cooking surface when warming shelf is used.
INSTALLATION WITHOUT WARMING SHELF
• Install these hoods 30" Min. to 36" Max. above the
cooking surface when installed over any professional
style cooktop or range.
• These hoods may be installed 24" min. above a gas or
electric drop-in style cooktop.
NOTE
Clearances may vary due to type of cooking product
and local codes. Check with local inspectors to be sure
standard is applicable.
SOFFIT INSTALLATION
Warming
Shelf
Backguard
SOFFIT
SOFFIT
32" min.
38" max.
30" min.
36" max.
In this installation the ductwork running from the top of
the hood will be concealed in the sot or upper cabinetry.
WALL MOUNT INSTALLATION
SOFFIT
SOFFIT
32" min.
38" max.
30" min.
36" max.
Install these hoods 30" Min.
to 36" Max. over a professional
style cooktop or range.
Allow 32" Min. and 38" Max.
clearance above any cooking
surface when installed with shelf.
For this installation, a decorative duct cover is available to
conceal the ductwork running from the top of the hood. Use of
the duct cover requires special consideration to the installation
height above the countertop.
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)